Puretronics      
 
 
 
 
 

Main Frequency Spark Tester

 
Wire Tester, Manufacturer of High Frequency Spark Tester Suppliers  
Product Brief
 
We manufacture Spark Testers for extrusion and rewind lines to check for defects in cable insulation. Cable passes through in a high-voltage bead chain electrode in the spark tester, and any insulation fault causes a spark from this electrode to the ground via cable core. Any spark is detected by spark tester electronics and registered as a fault. By using spark testers at your extrusion or rewind lines, you can monitor your cable product. If there is any fault in cable insulation, the spark tester will warn you by its alarm and you can search the possible cause and fix the problem, so you get product without any faults.
 
Features
 
Electronic switching based unique design.
Sine wave, low power circuit.
Confirms to National / International standards.
All digital displays for easy readout.
2 changeover signal for different interlocks.
 
Application - INSULATION TESTING
 
Online Extrusion Insulation Testing.
Online Rewinding & Testing Machine.
Online Coiling Machine.
Inspection Machine.
For Power Cable, Control Cable, Telephone Cable, LAN Cable, RF Cable, Automotive Wire, Building Wire.
 
Technical Specification
 
Model MFST-15 MFST-25
Voltage Range 0.5 / 15 KV 0.5 / 15 KV
Test Frequency 50 Hz (Same as supply Frequency) 50 Hz (Same as supply Frequency)
Wave Form Sine Wave A.C.RMS Sine Wave A.C.RMS
Wire Size 0.5 to 40mm O.D. (60mm on Demand) 0.5 to 40mm O.D. (60mm on Demand)
Electrode

Bead Chain housing of 350mm long

Bead Chain housing of 350mm long
Max Wire Speed 400 mts / min (MPM) 400 mts / min (MPM)
H. V. Meter Digital LED Digital LED
Sensitivity Adjustable sensitivity knob Adjustable sensitivity knob
Fault Counter 6 digit LCD Self Powered 6 digit LCD Self Powered
Power Supply 230V AC 50Hz, 1KVA 230V AC 50Hz, 1KVA
Interlocking By potential free change over By potential free change over
Safety Door interlocking switch Off the HV Door interlocking switch Off the HV
Adjustable wire Running height 800mm to 1200mm From ground level 800mm to 1200mm From ground level
Dimension in MM 600W X 1400 H X 470D 850W X 1230H X 700
Approximate Weight 80Kg. 110Kg.
 

Puretronics - Quality Spark Tester for Wire Manufacturer and High Frequency Spark Tester Manufacturer in India. Get more information High Frequency Spark Tester Manufacturer and Spark Tester for Wire Manufacturer in India from www.pureindia.net.